Do you know why the loader corrodes? Most internal combustion engine forklifts are used in ports, industries and many underground areas, such as mining sites. The use environment of loader is relatively extreme, especially in the port and chemical industry. The following explains the causes of corrosion.
Subtropical small loader parts. Humid tropics. Marine climate. Organic exhaust gas Dust and many other factors can cause damage and severe corrosion. Most small electric loaders are used in warehouses and other indoor locations. The environmental change is small, and the corrosivity caused by environmental factors is light. The influence of the corrosive environment inside the used agricultural loader on the working process, stress and friction caused by vibration Local damage caused by collision. This is the main reason for corrosion damage of small loader parts.
The main principle of metal corrosion is to convert the original metal into metal oxides, which will lead to rust of structural components and parts, and aging of non-metallic materials is mainly physical. For example, the appearance problems and characteristics of polymers caused by chemical reactions are reduced due to difficulties such as cracking and dissolution of small loaders after being comprehensively affected by the environment.
Before operation, the operator shall carefully check the safety belt, horn and lamp Safe use of six ton loader such as backup alarm. Pay attention to the speed of mechanical opening. Check the change of restraint and stability. The operator shall fasten the safety belt according to relevant specifications before each operation.
