The speed loss of the excavator seems to be a small question, but if it cannot be handled in time, it can cause the excavator to hold the car and other major problems. We hope that the majority of operators and owners will pay attention to it. Solution to speed loss of excavator engine
Engine stalling fault maintenance:
1. When the excavator engine loses speed, the excavator master should first check whether the diesel used by the excavator is deteriorated or has impurities? Is the oil way blocked?
2. Secondly, if the excavator is an electronic injection engine or a direct injection engine, the first step is to check the direct injection engine.
3. After checking the diesel circuit, check the valve clearance of the engine and the engine speed?
4. Then check whether the phenomenon of excavator engine stalling occurs when the engine is loaded?
5. Finally, check the engine to see if it is the engine failure that causes the excavator engine to lose speed.
Extended reading:
In general, the speed loss of the excavator engine is not directly related to the operating environment temperature of the excavator. Because of the oil cooling device and the air booster of the excavator, it is rare for the excavator engine to slow down even if the excavator is operating at a higher altitude.
It is easy to see that there are many situations and reasons for the engine speed loss. If the blind treatment fails to achieve the effect, it may also be useless, so you must carefully compare the fault phenomenon and treat it symptomatically.
