For small forklift loaders, facing complex daily mining tasks every day, a little carelessness may lead to accidents and safety accidents, or damage to nearby equipment, which will not only interfere with normal engineering construction, but also need to complete some compensation. So, how to reduce unnecessary damage? Proper mechanical equipment operation is crucial to the mine installation method. Today, we will introduce some safe operation methods to you.
The loader is a unique operating machine and equipment, so the driver of the mine loader needs to obtain a driving qualification certificate from the relevant Chinese authorities. During the whole driving process, the driver shall strictly implement the driving standards in the Equipment Operation and Maintenance Manual.
Small loaders may have certain risk factors during operation, so they must be cautious during operation. Here, I would like to introduce the common security problems in operation.
1. When starting, press the loudspeaker first to warn the surrounding workers to ensure safety.
2. Before development and movement, solve any operation rocker and pedal First try the steering wheel of the car to make sure that you are in a normal state, and then gradually enter the operation. Pay attention to the transformation and check whether the braking system is intact. If the brake system is completely normal, it can be developed and operated.
3. When driving, place the bucket 400 mm above the ground at the upper and lower relative height. Slow down when working on a mountain slope or crossing a canal Small angle, pay special attention to prevent overturning. When the carrying surface gradually slides into one side of the slope, it must be unloaded immediately to avoid sliding again.
4. Try to avoid too many tires Excessive deviation; Try to avoid two wheels hanging in the air, and only two wheels contacting the ground are not allowed to work again.
