1、 Adjust the orientation sleeve of shot blasting machine
The orientation sleeve of Jingong New Energy Loader can be adjusted according to the plan. In the application process, the damage of the directional sleeve caused the expansion angle of the projectile to expand, which accelerated the damage of other rain shields of the shot blasting machine and the cleaning chamber. Therefore, if the damage of the directional sleeve exceeds 10mm, replace it with a new directional sleeve (the opening direction and horizontal bevel angle are 450). Install the shot supply gate valve on the separator, insert the shot pipe into the seamless steel pipe behind the cleaning room, and connect all pipes according to the dedusting system diagram. The waste customers behind the separator can use the waste bucket to solve the problem.
II When the separator of second-hand new energy loader operates normally, the projectile flow curtain should not be vacant. If full curtain cannot be produced, the heavy hammer type shall be adjusted until full curtain is produced to obtain better actual peeling effect. The blocky raw materials behind the bullet screen shall be removed in time.
III Principle: Add the required number of workpieces to the cleaning room. After the equipment is running, the workpiece is driven by the roller and gradually rotates. At the same time, the shot blasting machine can efficiently throw out the shaped beam generated by the shot, and evenly hit the workpiece surface, so as to achieve the purpose of cleaning and strengthening. The shot and fine sand thrown out are injected into the thick steel plate sieve powder at the bottom of the removal chamber through the small round holes arranged uniformly on the track, and are sent to the bucket elevator through the screw conveyor, which is separated by the separator lifted by the elevator. The smoke and dust are sucked into the dedusting equipment through the centrifugal fan, the clean gas is discharged into the air, and the dust on the cloth bag falls into the dedusting box under the dedusting equipment through the manual vibrator, so that the customer can dedust on time. Waste sand is discharged through waste pipe. Customers can use Jingong caterpillar type micro digging pipe to recycle the ball sand mixture indoors. After the separator is separated, use a clean ball and enter the ball thrower to throw the workpiece through the ball system software.
