名媛直播

banner

Knowledge

Home>Knowledge>Content

How To Operate The Loader Reasonably?

Sep 09, 2022

How should the loader be operated reasonably?

?? First : when the loader is working, the heel is close to the wood floor of the car cab, the sole plate is parallel to the accelerator pedal, the rhythm is light, and the oil pedal is pressed underground.

? ? Second: always control the accelerator when the loader is running. In general, the throttle opening should be about 70%.

? ? Third: when the loader is running, the sole plate should be separated from the brake pedal and placed flat on the wood floor of the cab of the 10 ton wheel excavator. It is not allowed to step on the brake pedal. Loaders usually work in uneven construction sites. If the foot is always on the brake pedal, the left and right movement of the whole body will cause the driver to step on the brake pedal carelessly. In general, the control of machine conditions and gear shifts should be controlled by controlling throttle deceleration. This not only prevents the brake system from overheating due to frequent braking system, but also facilitates the convenient acceleration of the loader.

How to operate the loader reasonably?

? ? Forth: when the loader is operating and when it is shoveling in the city square, it should rotate the bucket and bucket with the circulation system under the condition that the accelerator is stable. It is often said that the circulation system of raw materials filled with lifting and rotating bucket control rods rotates "frequently". This link is particularly critical, which is very harmful to fuel consumption.

? ? Fifth: coordination is the mutual coordination of organic chemistry to improve the rotary bucket control lever. The whole process of digging by the new energy loader is to lay the bucket flat on the road and stably rush to the material pile. When shoveling the material on the parallel surface of the bucket, follow the standard of lifting the arm first and then retracting the bucket. In this way, the frictional resistance at the bottom of the bucket can be reasonably prevented, so that the large lifting force can be fully utilized.

? ? No: no sliding, no rear wheel tilting, no impact on the pile.