Hydraulic brick machine is a very common building material machinery, its operating procedures are very important, we must follow the following 9 elements in the use process.
1. When the hollow brick machine is running, it is strictly forbidden to put tools and hands into the drum to avoid accidents.
2. Before starting the hollow brick machine, check that the clutch, brake, wire rope, etc. should be in good condition, and there should be no foreign matter in the drum.
3. When the mixer is used, it must be placed in a solid place, with a bracket or a support stand, and tires should not be used instead of support.
4. Note that when the feed hopper is raised, it is strictly forbidden for anyone to pass or stay under the hopper. After the work is completed, the hopper should be fixed before leaving.
5. If hydraulic parts such as cylinders, valve blocks, valves, oil pipes, etc. of the hollow brick machine have oil leakage, maintenance methods such as replacement of oil seals and sealing rings or replacement of the whole parts should be used to avoid disease operation. The oil pump and oil motor must be listened, watched and touched frequently during operation. If abnormalities are found, they must be stopped and discharged.
6. Please keep the hydraulic system, oil pipeline and hydraulic station clean.
7. Pay attention that the oil temperature is too high, which will affect the performance of the machine.
8. When the hollow brick machine is overhauled, the hopper should be fixed and the power supply should be cut off.
9. The vibration pressure time of hollow brick machine 名媛直播 should be strictly controlled. The vibration time should be adjusted according to the product requirements. The best ratio between the yield and quality should be summarized. If necessary, the feed amount or feed times should be adjusted to achieve a balance.
