The newly purchased small loader needs to be run in before it can be used better, so how should we run in and maintain our small loader? Let's talk about the running in of the small loader.
1. Strengthen lubrication. The lubrication position of each part of the small loader that needs lubrication should be strengthened. It is recommended that during the running-in process of the small loader and each part, each class requires adding grease to each lubrication position that needs lubrication, which can protect the parts.
Monitoring of various oil fluids. Pay attention to frequently checking the quality of lubricating oil, coolant, hydraulic oil, brake fluid and fuel level.
3. Check the sealing performance of the small loader. Pay attention to check whether the sealing performance of the small loader is stable. If it is found that there is too little fuel during the inspection of the small loader, the cause of the low fuel should be analyzed.
4. The workload should not be too large. Be sure to pay attention to the workload during the break-in period of small loader parts. During the running-in period, more than half of the workload should not exceed 60% of the specified workload. In addition, a suitable workload should be arranged for the small loader to avoid unnecessary overheating of the site caused by long-term continuous operation of the small loader.
5. Stare at various instruments. When operating a small loader, remember to check the loader's various instruments. From the instrument of the small loader, we can see the working status of some loader parts, and we can solve problems in time if we encounter them.
