Home>Knowledge
Do you know why the loader corrodes? Most internal combustion engine forklifts are used in ports, industries and many underground areas, such as mining sites. The use environment of loader is relat...
As the most important tool of construction machinery, excavator is difficult for most drivers when it breaks down. In particular, the excavator will stop when it is held in a hold, which will lead ...
During the summer construction, the excavator is hovering at the edge of high intensity. At this time, the excavator master is most afraid of encountering abnormal phenomena in the excavator rental...
The speed loss of excavator engine is one of the problems that many operators have encountered, but because the cost of excavator shutdown is too high, most people will choose to continue construct...
High temperature weather will bring a lot of inconvenience to the use of the excavator. For example, the excavator has high water temperature, which is often accompanied by damage, air and water le...
After the excavator has been used for a long time, there will be some problems with the machine. For example, during driving, the most frustrating thing is that the excavator is slow. Whether it is...
The engine "burning oil" means that the oil enters the combustion chamber of the engine and participates in the combustion together with the mixture. "Burning oil" will lead to engine performance d...
The high oil temperature of excavator is very harmful, which has a great impact on the performance and life of the machine. Pay attention to this problem during the operation of the machine, and ti...
The owner is most worried about the black smoke fault of the engine, because this fault not only causes great damage to the engine itself, but also takes a lot of time and effort to repair. In fact...
1 Remove the oil drain switch at the bottom of the oil tank, and then wash it repeatedly with clean oil. Then flush the inside of the oil tank with a large air pump and use clean oil several times ...
