It is often encountered by customers who report that the forklift will generate relatively large noise during operation. So what exactly caused this problem? Next for everyone
To unravel the confusion, analyze the reasons for the excessive noise during forklift operation:
1. Loose fasteners, car body guide wheels and rollers, when the wear is severe, the gap is large.
2. The gap between the chain and the chain pin is too large, or the gap between the upper and lower staples of the fork and the crossbeam of the fork frame is too large.
3. Check if the conflict between the guide wheel, the roller and the mast is too large. Are the cooperation gaps between the fork and the beam of the fork frame too large? These factors
It will cause a lot of noise when the forklift is in use.
In short, there are many reasons for the noise generated by the forklift, and the operator should drive the forklift to the parking lot facility for special inspection
Therefore, if necessary, please ask a professional forklift maintenance engineer to carry out the test, so as to solve the doubt of the forklift noise from the source.
