名媛直播

banner

Knowledge

Home>Knowledge>Content

5 Precautions For ZL50 Loader in Loading Goods

Jan 06, 2023

The six ton loader can also be used to load goods, and cannot be loaded. Loading must be carried out according to the load capacity of the vehicle. Heavy materials will not only damage vehicles, but also be very unsafe. Here are the precautions for loading goods.
1. Before getting on the vehicle, it is necessary to confirm the net weight and the center of gravity of the goods, without eccentric loading, to prevent materials from dumping. The load of the trolley depends on two forks, and the total width is limited, so its center of gravity is very important for safe operation. The size of goods or pallets shall not exceed that of forks to prevent the trolley from being unbalanced.
Check the condition of racking Strength, safe load capacity and incomplete clamping plates cannot be used.
3. Bind the goods securely, and the materials must be coded neatly first. The goods loaded in second-hand 30 loading cases shall follow the principle of large, small, heavy and light, and the goods shall be bound firmly when they exceed 1.5 m.
When transporting spacious goods or with partial weight, special attention shall be paid to prevent disorderly dumping during use. Transport pallet, iron bar, etc. Attention shall be paid to safety to prevent injury to people or objects. Do not load more than 15 cards to prevent them from being too high Injury caused by sliding down the slope.
5. When the goods exceed the visual range of the operator and hinder the observation, the method of pulling people back and forth shall be adopted, and the method of pushing cars back and forth shall not be used to prevent people and objects from falling. It is not allowed to load too high goods on uphill, downhill and uneven sections. Because the center of gravity of the goods is uneven at this time, and the goods will fall down when encountering small mistakes. It is necessary to prevent them. 60 The loader shall not be forced to turn when going up and down the slope, and shall not be forced to turn on uneven roads. When installing goods with too high dimensions, be sure to leave them for monitoring. Pay more attention when driving, and do not start quickly Change direction and sharp turns to prevent falling.