Maintenance of loaders is preventive maintenance, simple maintenance, economy, is the key to extending loaders and reducing costs. For loaders, maintenance is generally divided into hourly or daily maintenance and regular maintenance.
1. Keep the machine clean and check if there is a loose part and tighten in time, otherwise it may cause danger.
2. Observe the instrument. If you find any exception, you must stop working until you find the reason and fix it.
3. Pay attention to the workload of the loader during operation. The workload at general time should not exceed 0.6 of the rated load. Don't work for a long time, so as to avoid accidents.
4. Check the hydraulic oil, coolant, brake fluid, fuel water, etc. Regularly check, pay attention to the seal after check. If you find more water shortage, you have to analyze the reason, and strengthen the lubrication of the lubrication point.
In addition to these, there is also a parking demand. The load tool should be parked on a flat ground and put the bucket on the ground. When the engine is turned off, the operating handle of the working device needs to be repeated to ensure that each hydraulic cylinder is in a pressureless stationary state. When the loader can only stop on the ramp, the tire is needed. Don't stop in places with open fire or high temperatures, so as not to heat the tires, causing an accident. In addition, when using a combination valve or gas storage tank to a tire, do not stand in front of the tire and prevent explosion. Only by knowing this, we can better use loaders.
