Home>Knowledge
1. The carburetor and air filter should be inspected for the inspection and diagnosis of the rich combustible mixture. 2. The mixture of mixed oil and engine oil is not compared, or the brand of en...
1： External oil leakage There are many reasons for oil leakage, including: oil pipeline, oil drain, oil pump gasket, fuel pump gasket, timing chain cover seal and camshaft seal. The leak detection ...
1. The air intake is insufficient or the air intake pipe is blocked. In order to find out the cause, the following checks should be carried out: whether the air filter is blocked; Check whether the...
The loader needs maintenance every day. In order to make the loader good, it needs to be cleaned and maintained every day. Let's see how to carry out routine maintenance. 1. It is relatively diffic...
Why can loaders work with high load? For a long time, the loader series models have occupied the primary position of construction machinery with their extraordinary quality and reliable toughness, ...
In our practical application, small loaders are widely used, but they will inevitably fail in use. Each gear of the small loader can not walk or walk, and the fault range can be limited to the torq...
There are many problems that must be paid attention to when working, and the use of the loader should also pay attention to maintenance, so that it can be used for a longer time. Now let's see how ...
Nowadays, many buildings can't do without small loaders in Shandong, which is very convenient for our work. However, our drivers must be trained to go to work, so that they can drive safely, which ...
Here are some methods for daily maintenance of small loaders. I hope they can help you. For normal maintenance of small loaders, first of all, pay attention to sanitation and cleanliness. The dirt ...
For newly purchased small loaders, they cannot be put into use immediately. For your own safety, check and run in first. Let's take a look with Xiaobian: 1、 When a new car is used for one time, it ...
