The manufacturer of new energy loader recommends that small forklift trucks check the transmission oil quantity positioning valve and transmission pressure gauge. If it is found that the transmission has no oil, add new oil, but not too much, otherwise it will lead to the thermal state of the transmission, which is usually added to the positioning valve.
Secondly, check whether the arm can take off and land, and whether it can rotate. If the arm can take off and land, it can also rotate, but the machine itself cannot walk. This is mainly due to the damage of the transmission pump and the lack of oil and water. If the arm cannot take off and land, it cannot realize the conversion process, and it cannot complete walking itself. This situation is mainly caused by the cracking of the steel plate connection of the cutting transmission by the bolt cutting elastic plate. Lift from the diesel engine and gearbox, remove the connecting position of the torque converter diesel engine, check the damaged position, and replace and repair the parts.
Explanation of the causes and troubleshooting methods of the loader's inability to walk
If the loader forklift cannot walk, do not panic, find out the cause and check the fault. I hope that the above can be mastered to a certain extent, and we need to be contacted.
How about the internal combustion device equipped with a small forklift cutter?
The internal combustion engine of small forklift generally adopts the fully imported MICO full hydraulic braking system and the automatic energy storage system with power disconnection, which is easier to drive and control. The main function of butter is wetting and sealing. What is the load status?
The internal combustion engine is equipped with a large diameter lifting cylinder, a rotary bucket cylinder, a lifting force and a digging force. The load barrels are even and the load is balanced. If the internal combustion engine brand enterprises want to successfully transform, they need to have perseverance. Internal combustion engine brand enterprises will continue to consolidate their existing position, while SMEs will face difficulties and reduce polarization. Absorb and remove the impact vibration of the transmission device from the engine and external load of the Jingong small loader. Do not install snow chains when the tire pressure is insufficient.
