Hydraulic brick machine is a kind of large-scale machinery, and its quotation is not high but not low. Users all hope that the service life of the hydraulic brick machine can be longer. The service life of the hydraulic brick machine is not only related to the quality of the equipment itself, but also has a lot to do with the correct use and maintenance of the operators. So, what? Extend the service life of the hydraulic brick machine?
1. Clean up dirt in time. After the hydraulic brick machine is used for a period of time, there will be impurities at the bottom of the filter housing, which will have a certain impact on the normal operation of the hydraulic brick machine. Operators are required to properly clean up. When cleaning, they must use cleaning oil that matches the type of system. The oil temperature must be controlled in a certain plan, preferably 45-80 degrees Celsius. Use large flow to remove impurities in the system as much as possible Wash away.
2. Avoid the appearance of hits and bumps. Especially when the hydraulic brick machine is working, there should be no bumps and other situations. At the same time, it is necessary to ensure that the materials are not corrosive to avoid harm to the equipment.
3. Avoid exceeding the rated power of the hydraulic brick machine. Every operator probably understands that the rated power of the equipment cannot be exceeded, otherwise it will cause the hydraulic brick machine to be overloaded, which will not only cause harm to the equipment, but also reduce the service life of the hydraulic brick machine.
4. Correctly handle the equipment shortcomings. Once the hydraulic brick machine exhibits shortcomings, it will be shut down for inspection and repair. The basic shortcomings will go into work without inspection and cleaning. This is the biggest concern of the operator.
