The construction gondola is a new type of high-altitude work equipment that can replace traditional scaffolding, reduce labor intensity, improve work efficiency, and can be reused. This article mainly describes the application and usage rules of the construction hanging basket.
1. The application of construction hanging basket
Construction gondola has been widely used in related industries in my country, and has also been greatly developed and improved. But in terms of technology, there is room for further progress in manufacturing materials and processing techniques. Like the hoist, can the ratio of lifting weight to self-weight be larger? In particular, the lifting capacity of the 800kg hoist is only 85kg higher than that of the 630kg hoist, but its own weight has nearly doubled.
At present, most of the working platforms of construction hanging baskets on the construction site are welded by 2mm thin-walled pipes. After years of use, this structure has proved that the quality is reliable. However, some of the problems should also be paid attention to: one is that the pipe wall is too thin, and the bolts at the connection part of the square pipe cannot be tightened when combining the platforms. Although some manufacturers are equipped with large-diameter flat pads, considering the quality of the current operators This method needs to be improved.
Can the 630kg lifter increase the lifting capacity by 80kg after some minor changes? Can some overload protection and misoperation prevention functions be added to the electrical circuit? These are already necessary facilities on the tower crane. The second is the connection of the bottom plate. In order to facilitate the bolts during installation, long holes are used. M12 bolts with 14x20 long holes, even with flat pads, are undesirable as mechanical equipment for aerial work. It is hoped that entrepreneurs who are aspiring to a higher level can play the role of vanguards and leaders in this field, so that our country's electric gondola can have a new breakthrough in quality.
2. Rules for the use of construction gondola
1. The operator of the gondola must be trained and obtain a valid certificate before passing the examination before being allowed to operate. The gondola must be designated for operation. It is strictly forbidden to operate the gondola without training personnel or the supervisor's consent.
2. Operators should wear safety helmets and safety belts while working, and the automatic locks on the safety belts should be buckled on the hanging life ropes that are firmly fixed on the buildings (structures).
3. Workers are not allowed to work when they are drunk or have abnormal fatigue.
4. Two or more lifting baskets must be operated by more than two persons. It is strictly forbidden to carry out single lift operations.
5. Operators are not allowed to wear hard-soled shoes, plastic-soled shoes, slippers, or other slippery shoes. It is strictly forbidden to use climbing tools such as ladders, rails, shelves, etc. in the suspended platform during the operation and to set up another hanging outside the suspended platform. With work.
6. Operators must go in and out of the gondola on the ground, do not climb in and out of the gondola in the air, and it is strictly forbidden to climb from one hanging platform to another under the suspended state.
