How to ensure the overhaul and maintenance of the tractor? To ensure the normal maintenance and maintenance of the tractor, start from mastering the working conditions of each operating system every day when driving, and deal with the problems immediately to reduce system failures and increase The lifetime of the entire equipment.
The significance of protective maintenance of tractors
1. According to the regular inspection of the operation of the tractor, stop the operation of the equipment in a planned way to ensure reasonable arrangements for the maintenance and repair of the gearbox.
2. Avoid key equipment failures and damage to related parts, and carry out maintenance before system failures occur to save large-scale maintenance costs.
3. Make the entire equipment parts have a longer service life, improve the economic benefits of the equipment and the machine, and maintain stable working characteristics.
4. Reduce the difficulty coefficient and workload of maintenance.
Precautions for maintenance of tractors
1. Familiar with the operating specifications of tractors
For tractor operators, they should be proficient in the use of machinery and equipment, and use the tractor in accordance with safe and reliable technical standards to ensure the "three understandings" (understanding the structure, understanding the mechanism, and understanding the characteristics). "(Able to use, maintain, routinely check, and clear common system faults). It is necessary not only to be able to drive machinery and equipment, but also to understand that machinery and equipment will be routinely inspected and maintained to ensure that the tractor has a longer service life.
2. Reduce the harm of the natural environment to tractors
Many customers will ignore the hazards of the natural environment and climate to the service life of tractors. It is known to many that most of the engineering project machinery and equipment are working in the open air. Depending on the engineering project to be connected, the workplace will also change, and the machinery and equipment are vulnerable to the environmental temperature, natural environment, climate and other factors of the location. If it is a machine working in a fixed place for a long time, it is best to have a parking room (shed), or choose an upper cover to minimize the damage caused by the sun and rain. Therefore, effective equipment safeguard measures should be taken according to the climate and natural environment.
3. The construction period is tight and maintenance work cannot be ignored
Construction companies should not ignore the necessity of maintenance due to the tight schedule, and ignore the maintenance of construction machinery and equipment. It is incorrect to think that as long as the machinery and equipment are running normally and there is no major system failure, they can be carefree; Failure to maintain and maintain it immediately may lead to great safety hazards. There are many major safety accidents that have accumulated over time. When a real safety accident occurs, it will not help. Therefore, you cannot forget the tractor to rush the project. Maintenance.
4. Choose a suitable maintenance method
It is not possible to repair the tractor until it is unavoidable to overhaul. When a system failure is found, it should be detected and repaired immediately. Maintenance practice can choose the following methods: one is the exchange of parts. Many parts of construction machinery, such as bulldozers, excavator track pins, diesel engine cylinder liners, etc., are usually subjected to unidirectional load during operation, which leads to unbalanced Wear and tear, if the position of the parts subject to the unbalanced load is replaced in a timely manner to make their wear even, the service life can be extended. The second is to use advanced brush plating and adhesive repair technology, which can also repair failed parts quickly and at low cost, such as wear-resistant surfacing, sprayed diamond plating, magnetic plating, laser plating, etc.
5. Use qualified accessories and oil
When the tractor is overhauled, the parts and components should not be removed blindly and replaced with inferior accessories. This will damage the machinery and equipment, and the probability of failure will increase in the future. Also, when replacing refined oils such as engine oil, hydraulic oil, gear oil, etc., you must also use refined oil of the appropriate tractor model instead of low-quality, low-priced refined oil.
