The hot summer, soaring temperatures have brought great challenges to both drivers and forks. The driver friends at work not only to prepare warm boiling water and wind, but also prepare heatstroke drugs, so as to more efficient completion of daily work. Similarly, when facing the high temperature working environment, the regular maintenance and maintenance of fork lift machines can help them cope with the high temperature challenges better, so as to ensure the mechanical performance and construction efficiency of .
During the summer maintenance, we should pay attention to the following points:
1. Add and replace antifreeze in time
Antifreeze is not just used in winter! The characteristics of high boiling point can make it effective to prevent boiling water from cooling water in hot summer, which is very important for daily use. Therefore, if you do not want to make your fork lift "high fever, high temperature", it should be timely check whether the antifreeze needs to be replaced or added. It is necessary to replace the designated professional antifreeze, not to mix the use of different brands of antifreeze, otherwise the whole engine cooling system will be corroded or blocked.
Two. Check the brake and prevent tire blowout
For the tyres, the high temperature will cause the tire pressure to rise and trigger the tire during the continuous operation in the summer. Therefore, it is necessary to check the braking efficiency of the whole machine so as to reduce the hidden trouble of the accident. In the process of inspection and maintenance, the cold water must not be forced to pour the tires and brakes in cold water, which will cause serious damage to the equipment.
Three. Use the original quality of fuel and oil
Try to purchase all kinds of oil, such as oil, oil, transmission oil, butter, and so on in regular channels, so as to ensure the quality. At the same time, oil and oil should not be overdose, because too much, in addition to increasing fuel consumption, excessive oil will make the engine high temperature. In addition, special attention should be paid, if the fuel oil tank tanker is transported for more than 2 hours, it will be added after the impurity is precipitated.
Four. Use good quality butter
Good quality butter has a very important effect on the performance of the working device of the fork mounting machine. Because summer temperatures, butter softens after adhesion will be reduced, so the lubrication performance of various working device declined, causing all kinds of mechanical failure, the heat-resisting performance of butter can maintain its adhesion in the use of high temperatures, the process is relatively slow deterioration failure.
Five, keep clean and comfortable operating environment
In the hot summer of mine, a clean and comfortable operating environment to the driver's health and work efficiency is very important. When air conditioning is used in summer, we should remember to check the air conditioning system of the cab, including whether there are foreign bodies in the radiator, etc., so that we can periodically clean and replace it to ensure the cooling effect of the air conditioner.
Six. Check electrical circuit to prevent oil pipe burst
High temperature in summer, all kinds of circuits in the whole machine are more prone to heat. Before every day, check whether the line has broken down and prevent short circuit spontaneous combustion. At the same time, it is also necessary to check whether the oil pipe in the whole machine is cracked and hardened to prevent the tubing from cracking.
